SPEED FEED 400 NYLON HEAD 10 x 1mm Stihl

Speed Feed 400, Nylon Head Suit Stihl “10mm x 1mm Adapter”

This is a new aftermarket SPEED FEED nylon BUMP feed head for the following Stihl FS Trimmers FS55, FS80, FS85, FS90, FS110, FS130, FS94, FS131, FS120, FS200, FS250 also fits all the KM type attachments.

This is for ONE complete SPEED FEED NYLON HEAD with the 10 x 1mm adapter. The red one is 8mm x 1.25mm left hand thread suit some Echo, Shindaiwa, Husqvarna, Jonsered, Makita etc..

PLEASE NOTE: If you find the head to sensitive you will need to mount the blade washer ( has star drive in washer ) above the head this helps a lot. If you need one can do them for an extra $6.00.

The awesome thing about these heads is you don’t have to pull them apart to fill them with line, you just twist the bottom part of the head until the FEED arrows line up, then feed one big length of line through (about 3-4 metres) pull through so there is and even amount of line on both sides then just wind the head up and it pulls all the line in at the same time, then just TAP and GO.

I can load this type of head in less than a minute, hence SPEED FEED name.

The Stihl adapter is 10mm x 1mm left hand thread, suits Stihl FS44, FS55, FS85, FS90, FS110, FS130, FS120, FS200, FS250 etc… can also do an adapter for the bigger machines that run a 12mm thread, and have left hand taps for all sizes, so can make this head fit anything!

I can also machine these adapters to any size thread from 8mm x 1.25mm up to 12mm x 1.5mm in any pitch thread in left hand and right hand thread, so can make your speed feed head fit just about any line trimmer or brushcutter

Any Questions just ask.


26.61$ (USD)

2 in stock

Can't quite find what you are looking for?
Contact us to see if we can supply what you need.

Website by